In this article I will present a new automatic door opening system called iSmartGate, which consists of two elements: the element of control iSmartGate and an application for the same name iOS devices.
To operate the system should follow three simple steps:
Step 1. The first step is to acquire the gadget iSmartGate, version (iSmartGate 01E) Ethernet or WiFi (iSmartGate 01W) version. Once you have your 01E/W iSmartGate, the next step is to connect it to the entrance of your House or garage door Control Panel, and the WiFi your home or establishment.
Step 2.The second step is to configure the name of door (gatename), password (password), and the network port (if you have more than one computer in the same WiFi), otherwise, you can use the one that comes by default and the IP broadcast on our network.
You can also set usage: GRG: garage, PUL: press (to open or close blinds) and ö: On & Off (to open lights or irrigation systems). Configurations are made directly from the gadget, without the need for computers or computer programs.
Step 3. The third step is to download the mobile application for our smartphone. The iSmartGate application is available both on the App Store for all iOS devices, but also for Android phones. Once downloaded the application, you only have to connect our smartphone to the same WiFi network as the gadget.
Then go straight to the mode "Add gates" and enter the same name of the door (gatename), password (password), the same port (port) and likewise of use that have been set up in the gadget (e.g.: GRG).
After the operation, a Green Strip is drawn in the main page of the application, indicating that the iPhone/iPad is connected to the gadget.
It must be pointed out that the system has been implemented taking into account security as the main design element. The connection between the gadget and the application is done with encryption 128bits, generated from the parameters set in the door, which read only application if match door (gatename), password (password), the port of destination (port) and the mode of operation configured in the gadget. Generated by the various gadget in time and only encryption shall be valid for 0.5s, repeating the same every 137 years.
The main advantage of this system is that he lets you access your home directly from your mobile, without the need for controls. In addition, such a system is compatible with 100% automation systems and does not affect your warranty. You need only 5 seconds to realize its usefulness once installed, because that can only access your home of those who have the gatename and password.
In addition, always these timely reconfigure the access data directly on the device without installing any software.
The application of iSmartGate is free and you can get it by clicking here. In terms of the control element, you can get more information at the official website of the manufacturer V2FE.
